DELUXE PREFABRICATED STRUCTURES TECHNICAL SPECIFICATIONS

TECHNICAL DATA:  Production is based on 80 kg/m² snow mass, wind velocity of 80 km/hour, 1st degree earthquake conditions and 3rd climatic region conditions.

1- EXTERNAL AND INTERNAL WALL PANELS

• The walls’ external sides are cement plates of 8x1200x2500mm dimensions and the internal sides are gypsum panel of 12x1200x2500mm dimensions.
• The wall panels will be carcass.
• 12-14 density, 44 mm thick polystyrene foam will be used for insulation.
• Insulation coefficient factor is K: 0,64 kcal/m² hc.

2-  WALL COMPOUND

• Constructed with specially plied sheets and profiles for a covering system.

3- WINDOWS

• The Windows are made of 60mm thick white PVC and are 1160*1000 mm. in size
• The vasistas windows are 400*600 mm. in size
• The glass is thermal insulation glass.

4- DOORS

• External doors are 900*2000 mm in size, steel doors
• Internal doors are 80*2000 mm in size, American style ribbed doors

5- LOAD BEARING STRUCTURE

• The roof brackets are made of box profile and specially made DKP steel sheet profile.  There is a steel shear at every 120cm all around the building.
• The columns are constructed of specially made DKP steel profiles.
• The purlins are 5*5 cm. in size and made of wood.
• The connections are fastened with nuts and bolts that may be fastened and unfastened multiple times.

6-  CEILING COVERING AND INSULATION

• The ceilings are covered with 12 mm thick gypsum plates.
• The ceiling is insulated with 80 mm thick fiberglass.
• The ceiling connection is made by plying and then crushing the DKP steel sheet that has been forged under the roof brackets. 
• The ceiling is constructed as a suspended ceiling.
• The ceiling heat insulation coefficient factor is K:0,49 kcal/m² hc.

7- CEILING COVER

• OSB plate, membrane and shingles are applied over the purlins. 
• The building will surrounded with a 20 cm wide plied DKP steel plate overhang.
• The ceiling will have an earthquake diagonal rod made of profiles.
• PVC rainwater leaders and gutters will be put in place.

8- PAINT

• The external metal surfaces are painted with double body coat and double synthetic oil paint.
• The external betopan is covered with siding.
• The internal walls and ceiling are coated with plastic paint.
• The external wall joints are coated with mastic.
• The internal walls are coated with gypsum plaster.
• All paints used have TSE certificate.

9 - ELECTRICAL INSTALLATION

• The complete installation is TSE certified and will be placed under the plaster.
• All switches and plugs are already mounted.
• Electrical panel and counter are not included.

10 - SANITARY INSTALLATION

• Potable water plumbing is made of PVC based and TSE certified white piping placed under the plaster.
• The faucets and armature fittings are TSE certified and will be handed over without assembly.
• Water counter is not included.